Product description:
Uk10-drehsi1 nut type fuse terminal is used with ordinary insurance terminal different nut type installation insurance tube, its characteristic lies in insurance, insurance tube is more stable and firm, will not hesitate to shake easily off and pop up.
Widely used in ships, cars, aircraft and other fields.
The maximum connection capacity of this type of terminal is 16 square mm, withstand voltage 800V, current 10A, its actual current can withstand much more than 10A.
Uk10-drehsi1 nut type fuse terminal is used with ordinary insurance terminal different nut type installation insurance tube, its characteristic lies in the insurance tube more stable and firm, will not hesitate to shake easily off and pop up.
Widely used in ships, cars, aircraft and other fields.
The maximum connection capacity of this type of terminal is 16 square meters, 800V voltage, 10A current.
The actual current it can withstand is much more than 10A. The product is produced with M4-type screw with a strong torque of 1.2-1.8, which can ensure that the wire is firmly locked in the wire pressing frame.
The guide rails can be used together with TH35/7.5, G32/15 and other series of guide rails.
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
800V |
10A |
| Standard Wiring Range: |
Minimum Wire Diameter 0.5mm |
Maximum Wire Diameter 16mm |
| Contact Material: |
Brass H58 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 8.2mm |
Width is 42 mm |
Height is 59 mm |
2. Size
Uk10-drehsi fuse terminal height 59 mm, length 62 mm, thickness 12 mm, is a professional design for the protection of circuit and electrical installation terminals.
3.Product accessories
1. When selecting the fuse of UK10-DREHSI1 nut type fuse terminal, only 5*25 tubes can be used, because if the length is too long, the fuse can not be used normally due to the need for screwing.
Material quality respect recommends to choose to use ceramic insurance tube, because the wall thickness of glass tube is limited, its intensity is high for example of ceramic tube.
The type of 2 marker bar is ZB10. It is worth noting that the thickness of this type of terminal is 12mm, so ZB10 needs to be divided into a single number for use.
3. Th35/7.5,G32/15 series of guide rails are used, and the thickness is recommended to be more than 1.0 chamber meters.
4 Firmware still use E/UK,EW-35,SUK-E, etc.
5 mark holder, mark holder for UK-B1,UBE/D,KLM-A.
Audited Supplier 
){kind=link}
){kind=link}