Product description:
UKK3 adopts frame screw crimping structure, upper and lower double layer design, four wire pressing frame adopts 2.5-square-meter wiring capacity, current overload capacity 32A, voltage bearing capacity · force 500V.
The product adopts the same shape size as UKK5 in dimension design, only slightly different in thickness, so the same type of products can be used in baffle and installation guide rail.
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
600V |
32A |
| Standard Wiring Range: |
Minimum Wire Diameter 0.2mm |
Maximum Wire Diameter 2.5mm |
| Contact Material: |
Brass H58 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 5.2mm |
Width is 56 mm |
Height is 60.7 mm |
2. Size
1).UKK3 double-layer terminal baffle D-UKK3/5 is suitable for UKK3 and UKK5 double-layer terminals.
2).ZB5 series is used for the 2 marks. The numbers include 1-100, and the orange marks 10-100 are available for selection. Special requirements can be customized.
3).Fb110-5 is used for center type bridge, which is suitable for all terminals with thickness of 5.2 chamber meters.
4). Fasteners for UKK3 double-layer terminals are E/UK,EW-35,SUK-E,E/AL-NS-35.
5). marking terminals and clip models are UK-B1,UBE/D,KLM-A.
3.Product accessories
UKK3 double layer terminal height 62 mm, width 56 meters, thickness 5.2 meters, suitable for a variety of 2.5 square meters wiring environment, this product with the upper and lower double layer characteristics can effectively reduce the length of guide pin installation and reduce the construction time.
The upper layer of the product can be short-circuited with a bridge. As the thickness of the product is 5.2 mm, it can be short-circuited with FB10-5.
The marker bar is ZB5.
){kind=link}