Product description:
UK16B terminal is made of high strength nylon double six as shell insulation material, with high strength, aging resistance, corrosion resistance, acid and alkali resistance, flame retardant grade.
Conductor part is used is high strength alloy copper, has high strength, aging resistance, strong electrical conductivity and other advantages.
The screw adopts M4- type screw with strong self-locking ability.
UK16B terminal is made of high strength nylon double six as shell insulation material, with high strength, aging resistance, corrosion resistance, acid and alkali resistance, flame retardant grade.
Conductor part is used is high strength alloy copper, has high strength, aging resistance, strong electrical conductivity and other advantages.
The screw adopts M4- type screw with strong self-locking ability.
In the production of metal parts, various electroplating and heat treatment processes are used to improve the electrical properties and strength of the products, as well as the oxidation resistance.
The plastic shell adopts different proportions of materials in different seasons to ensure that the product can adapt to different harsh environments.
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
1000V |
150A |
| Standard Wiring Range: |
Minimum Wire Diameter 16mm |
Maximum Wire Diameter 50mm |
| Contact Material: |
Brass H92 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 20mm |
Width is 70.5 mm |
Height is 83.5 mm |
2. Appendix
UKH50 uses DZ47 series installation guide rail, this kind of guide rail is widely applicable to the need to install C45,UKX series terminal, guide material is divided into aluminum alloy and iron colorful, thickness from 0.8-2.0 more than, commonly used thickness is 1.0 and 1.2 mm.
The marking bar adopts the largest mark ZB10. Symbols such as numbers and letters can be selected at will. The characters that do not exist can be customized according to requirements.
Mark terminal UBE/D, a width of 2.0cm, is used to mark a group of terminals or a combination of terminals. Open the cover, take out the paper card, write or print required characters, and then put the paper card into the cover to complete installation.
The fixer E/UK is suitable for fixing all terminals, which can be divided into two types: double screw and three screw. Compared with three screw, the fixing effect of the two types is better, and its structure is more reasonable and it has stronger ability to adapt to various environments.
Uk-b1 terminal marker block has the same function as UBE/D, except that its width is 1cm. Klm-a terminal marker clip has the same function as MARKING terminal, except that it needs to be installed with A fastener.
){kind=link}