| Customization: | Available |
|---|---|
| Application: | Industrial, Power Station |
| Voltage: | 24kv/25kv |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
l Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
l Built-in capacitive test point to determine the circuit status or install a fault indicator.
l No minimum phase clearance requirements.
l Mounting can be vertical, horizontal, or any angle in between.
l For connection of polymeric cable to transformers, switchgear, motors and other equipment with a pre-molded separable connector.
l For indoor and outdoor installations.
l System voltage up to 24 kV.
l Continuous current 250 A (300 A overload for 8 hours).
l Cable particulars:
-Polymeric cable (XLPE, EPR, etc.)
- Copper or aluminum conductors
-Semiconducting or metallic screens
- Conductor size 25-120 mm²
Ratings Overview:
(Um) Maximum system voltage:25kV
Impulse withstand voltage:125kV
AC withstand voltage ,5min:54kV
Continuous operating current:250A
Overload (8 hrs. Max.) :300A
Short circuit withstand:12.5kA/1s
REMARK: All the data based on the standards IEC, Not the limited.
Product Structure
1,Conducting Rod: Tin-plated copper pin screws into the conductor contact with the supplied hex key.
2,SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress.
3,Insulation: Molded EPDM insulating rubber is formulated and mixed in-house to ensure high quality.
4,Pulling Eye: Encapsulated stainless steel pulling eye with a decent to position the bail.
5,Capacitive Test Point: Capacitive test point provides means to check circuit status. Molded EPDM conducting rubber cap provides a watertight seal.
6,Stress Relief: The configuration of the outer shielded and the cable adapter provide cable stress relief.
7,Cable Adapter: The sized opening provides and interface fit to maintain a watertight seal.
8,Grounding Eye: Molded into the external screen for connection of an earth wire.
9,SEMI-CONDUCTIVE SHIELD: Molded EPDM conducting rubber mates with the cable screen to maintain screen continuity and ensure that the assembly is at earth potential.
10,Conductor Cable lug: Inertia welded bimetallic compression connector accepts copper or aluminum conductors.
| Description | Reference No. | Conductor Crosssection (mm²) | Stretch Range Overinsulation (mm) |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-25 | 24 | 16.3-19.9 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-35 | 35 | 16.3-19.9 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-50 | 50 | 16.3-19.9 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-70 | 70 | 19.8-23.5 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-95 | 95 | 23.1-27.1 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-120 | 120 | 23.1-27 .1 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-35 | 35 | 23.1-27 .1 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-50 | 50 | 23.1-27.1 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-70 | 70 | 23.6-26.4 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-95 | 95 | 23.6-26.4 |
| 25kv/24kV 250A Load break Elbow Connector | AH ZT-10/250-120 | 120 | 27.9-33.5 |
){kind=link}