Product description:
URTK/S test current terminal sliding block is in the middle to rapid control circuit disconnection and connection ways of closing and opening, it is mainly suitable for circuit cable under 6 square loop test to use, so some companies in the industry also said its model for URTK / 6 S, current testing terminal main body have four parts, insulation casing, two copper conductor piece and a slide
Block, the main function focuses on the conductor and slider.
The shell part acts as an insulator and supports the metal parts.
URTK/S universal test terminal can be simple circuit test simple transformer test loop only need two test terminals, the terminal street is equipped with longitudinal slide, measurement current can not break operation
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
500V |
57A |
| Standard Wiring Range: |
Minimum Wire Diameter 0.5mm |
Maximum Wire Diameter 6mm |
| Contact Material: |
Brass H58 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 8.2mm |
Width is 71.5 mm |
Height is 51.5 mm |
2. Size
URTK/S test current terminal length 71.5mm, width 8.2mm, height 51.5mm.
Since the size of this product is relatively large compared to the size of ordinary terminals, almost no accessories can be used with other terminals during assembly, except for rails, fasteners, marking strips and other general accessories.
The baffle is unique D-URTKS and the bridge is FBI-URTKS.
3.Product accessories
1. Baffle URTK/S test current terminal uses a unique baffle D-URTK/S, this baffle can only be used in the test current terminal series, other series of products can not be used together.
2. The labeling strip is ZB8, because the thickness of the product is 8.2 chamber meters, the labeling strip of other specifications cannot match.
3. Bridge parts URTK/S test current terminal bridge mode although can be defined as the center bridge, but its fixed mode with screw mounting hole is not in the dominant body, but in the conductor frame on the special design of raised mounting hole.
4. In terms of fasteners, URTK/S has no special fasteners for use, which can be used with common terminal fasteners.
5. UK-B1 and UBE/D are still the mainstream for marking terminals, KLM-A is suitable for terminal fasteners.
){kind=link}