Product description:
UKK5 double layer terminal adopts double in double out two layer design, the product can simultaneously satisfy two lines connect two lines not more than 4 square meters.
The product can withstand 32A current, 500V, voltage.
The upper layer can be shorted using FB110-6 center bridge.
The ends can be sealed with D-UKK3/5 baffles.
Products are suitable for power distribution cabinet, low-voltage electrical cabinet, fire protection and other major industries, is 4 square meters to connect an excellent product.
The upper and lower layers can be shorted to form a closed double-layer terminal.
UKK5 double-layer terminal uses M3-type screw, and M3 electric screwdriver is required for assembly and later use.
1.
Parameter
International product standards: |
IEC60947-1 |
GB14048 |
Rated Voltage Current: |
500V |
32A |
Standard Wiring Range: |
Minimum Wire Diameter 0.25mm |
Maximum Wire Diameter 4mm |
Contact Material: |
Brass H58 (body galvanized brass, screws galvanized iron) |
Insulator Material: |
PA66 Engineering Plastics |
Flame Retardant Grade: |
94-V-0 |
Product Standard Size: |
Thickness is 6.2mm |
Width is 56 mm |
Height is 62 mm |
2. Size
UKK5 double terminal, length 56 mm, height 62 mm, thickness 6.2 chamber meters.The screw center spacing is 13 mm and 37 cm, respectively.
3.Product accessories
1. The same type of baffle D-UKK3/5 is used for UKK5 and UKK3 double-layer terminal blocks. This baffle is commonly used for these two types of double-layer terminal blocks.
2. The marking bar adopts ZB6 series marking bar with a width of 6.2mm, with blank printed characters to choose from, or customized according to requirements.
3.UKK5 double-layer terminal adopts center type bridge, model is FB110-6, suitable for products with terminal width of 6.2mm.
For the lower layer, the center type bridge cannot be used, but the side plug type bridge EB10-6 can be shorted.
4. There is no special use of fasteners,E /UK,EW-35,SUK-E series fasteners are still used.
5 Mark terminals such as UK-B1.UBE/D. KLM-A