Product description:
UK10N terminal is made of high strength nylon double six as shell insulation material, with high strength, aging resistance, corrosion resistance, acid and alkali resistance, flame retardant grade.
Conductor part is used is high strength alloy copper, has high strength, aging resistance, strong electrical conductivity and other advantages.
The screw adopts M4- type screw with strong self-locking ability.
UK10N terminal is made of high strength nylon double six as shell insulation material, with high strength, aging resistance, corrosion resistance, acid and alkali resistance, flame retardant grade.
Conductor part is used is high strength alloy copper, has high strength, aging resistance, strong electrical conductivity and other advantages.
The screw adopts M4- type screw with strong self-locking ability.
In the production of metal parts, various electroplating and heat treatment processes are used to improve the electrical properties and strength of the products, as well as the oxidation resistance.
The plastic shell adopts different proportions of materials in different seasons to ensure that the product can adapt to different harsh environments.
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
800V |
76A |
| Standard Wiring Range: |
Minimum Wire Diameter 0.25mm |
Maximum Wire Diameter 10mm |
| Contact Material: |
Brass H62 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 10.2mm |
Width is 42.5 mm |
Height is 47 mm |
2.Product Design
1)The height of the product is 47 meters, which is the same size as UK3N, so accessories such as guide rails and baffles with the same specifications can be used in the assembly of the product.
2)The width is 42.5 mm, and the mounting guide rail is suitable for standard 1.0 thickness and 35 mm width.
3) Thickness 6.2 mm.Mark bar and bridge selection distance is 6.2 mm.
3.A
ccessories Function
1 Baffle D-UK3/10, the baffle function is to seal the exposed metal part of the terminal, effectively delay the oxidation speed of the metal part, but also prevent the occurrence of short circuit accidents and dangerous situations.
2 Marking bar, UK5N uses ZB6 marking bar, numeric characters can be customized according to demand, or blank marking bar can be ordered and written with oiliness marker pen.
3 Center type bridge.
UK5N is matched with FB110-6, different number of terminal bridge can be cut by scissors or pliers.
4 Fasteners, the use and selection of fasteners need to be based on the environment. In cold environment, 3 screws E/UK or SUK-E,EW-35 can effectively avoid foot breakage.
5 Marking blocks. Marking blocks with different thicknesses are selected according to the space used. The main models are UK-B1 and UBE/D, with widths of 1cm and 2cm respectively.
6 Mark clip and mark seat can be used interchangeably, the advantage is that the installation only needs to be fixed, the disadvantage is that the position must be fixed, otherwise the installation can not be completed.
){kind=link}