Product description:
Uk10-drehsi1 nut type fuse terminal is used with ordinary insurance terminal different nut type installation insurance tube, its characteristic lies in insurance, insurance tube is more stable and firm, will not hesitate to shake easily off and pop up.
Widely used in ships, cars, aircraft and other fields.
The maximum connection capacity of this type of terminal is 16 square mm, withstand voltage 800V, current 10A, its actual current can withstand much more than 10A.
Uk10-drehsi1 nut type fuse terminal is used with ordinary insurance terminal different nut type installation insurance tube, its characteristic lies in the insurance tube more stable and firm, will not hesitate to shake easily off and pop up.
Widely used in ships, cars, aircraft and other fields.
The maximum connection capacity of this type of terminal is 16 square meters, 800V voltage, 10A current.
The actual current it can withstand is much more than 10A. The product is produced with M4-type screw with a strong torque of 1.2-1.8, which can ensure that the wire is firmly locked in the wire pressing frame.
The guide rails can be used together with TH35/7.5, G32/15 and other series of guide rails.
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
500V |
32A |
| Standard Wiring Range: |
Minimum Wire Diameter 4mm |
Maximum Wire Diameter 2.5mm |
| Contact Material: |
Brass H58 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 28mm |
Width is 31 mm |
Height is 5.2 mm |
2. Size
MBK3/E-Z fuse terminal height 28 mm, length 31 mm, thickness 5.2 mm, is a professional design for the protection of circuit and electrical installation terminals.
3.Product accessories
1. The baffle design of MBK3/E-Z small terminal is suitable for this type of terminal, and cannot be used with other types of terminals. The model is D-MBK, which is suitable for MBK small terminal.
2. The marking strip has the same selection rule as the UK series terminal block, the marking strip specification is determined by the thickness of the product. The thickness of this product is 5.2mm, so the marking strip is ZB5.
3. The short connector adopts the same specification FB110-5 as UK series, which is suitable for terminals with thickness of 5.2 mm.
4. MBK fasteners are professional designed for 15cm width guide rail fasteners, model is E/MBK, suitable for all MBK series wiring terminals and grounding terminals.
5. The guide rail for MBK series terminals is 15mm wide.
){kind=link}