Product description:
UKH150 high current terminal, the product is suitable for the use of 150 square meters of cable, the maximum current bearing capacity 309A, withstand 1000V.
The frame screw structure is adopted in the product, and the cable is crimped by lifting the screw. The M10 inner hexagon screw adopted in this product has strong compression force and good tightness, which is the best choice for the secondary connection of high-current cables.
1.
Parameter
| International product standards: |
IEC60947-1 |
GB14048 |
| Rated Voltage Current: |
500V |
24A |
| Standard Wiring Range: |
Minimum Wire Diameter 0.25mm |
Maximum Wire Diameter 2.5mm |
| Contact Material: |
Brass H58 (body galvanized brass, screws galvanized iron) |
| Insulator Material: |
PA66 Engineering Plastics |
| Flame Retardant Grade: |
94-V-0 |
| Product Standard Size: |
Thickness is 5.2mm |
Width is 62 mm |
Height is 56 mm |
2. Size
3.Product accessories
1. Baffle side MBKKB2.5 mini double-layer terminal adopts independent specially designed baffle, which can seal the exposed parts of the upper and lower layers at the same time.
3. The bridge is fB110-5 series center bridge, which can cut any digit according to the demand.
4. Fixed parts adopt E/UK,EW-35 and other accessories, and the use principle is designed according to the toughness and elasticity of plastic material.
5 marking terminals UK-B1 and UBE/D are designed by card rail, which can be directly stuck to the guide rail for use, while KLM-A is used in conjunction with E/UK. Although this method has certain disadvantages, it can save some space for the length of the guide rail only when the terminal is used in general.
3.Product accessories
){kind=link}